? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. shielded power inductors C lps4414 document 548-1 document 548-1 revised 10/01/10 dcr srf i sat (a) 5 i rms (a) 6 inductance 2 max 3 typ 4 10% 20% 30% 20c 40c part number 1 20% (h) (ohms) (mhz) drop drop drop rise rise lps4414-301ml_ 0.30 0.040 470 5.6 5.7 5.8 2.35 3.25 lps4414-501ml_ 0.50 0.050 330 4.3 4.4 4.5 2.10 2.80 lps4414-701ml_ 0.70 0.055 225 3.7 3.75 3.8 1.85 2.50 lps4414-102ml_ 1.0 0.060 190 3.0 3.1 3.2 1.75 2.30 lps4414-152ml_ 1.5 0.078 150 2.9 3.1 3.2 1.55 2.00 lps4414-182ml_ 1.8 0.087 130 2.7 2.8 2.9 1.50 1.90 lps4414-222ml_ 2.2 0.110 115 2.2 2.3 2.35 1.25 1.60 lps4414-332ml_ 3.3 0.165 85.0 1.8 1.9 1.95 1.15 1.50 lps4414-472ml_ 4.7 0.215 68.0 1.4 1.5 1.55 0.90 1.20 lps4414-562ml_ 5.6 0.260 58.0 1.4 1.4 1.5 0.75 1.10 lps4414-682ml_ 6.8 0.270 54.0 1.2 1.3 1.4 0.70 1.00 lps4414-822ml_ 8.2 0.350 50.0 1.1 1.3 1.3 0.70 0.98 lps4414-103ml_ 10 0.380 43.0 1.1 1.2 1.3 0.70 0.95 lps4414-123ml_ 12 0.380 38.0 0.94 0.97 1.0 0.66 0.88 lps4414-153ml_ 15 0.440 36.0 0.85 0.89 0.92 0.63 0.82 lps4414-183ml_ 18 0.530 31.0 0.76 0.80 0.82 0.56 0.75 lps4414-223ml_ 22 0.590 27.0 0.69 0.72 0.74 0.53 0.68 lps4414-333ml_ 33 0.715 23.0 0.47 0.49 0.51 0.49 0.65 lps4414-473ml_ 47 0.935 18.0 0.39 0.42 0.43 0.44 0.58 lps4414-563ml_ 56 1.15 16.0 0.37 0.39 0.40 0.42 0.54 lps4414-683ml_ 68 1.35 14.6 0.32 0.33 0.34 0.36 0.48 lps4414-104ml_ 100 1.90 11.0 0.26 0.28 0.285 0.31 0.40 lps4414-124ml_ 120 2.60 10.0 0.23 0.24 0.25 0.27 0.34 lps4414-154ml_ 150 3.10 9.0 0.22 0.23 0.24 0.24 0.32 lps4414-224ml_ 220 4.10 6.7 0.18 0.20 0.20 0.22 0.29 lps4414-334ml_ 330 6.00 5.6 0.14 0.16 0.165 0.17 0.23 lps4414-474ml_ 470 9.50 4.3 0.13 0.14 0.145 0.14 0.23 lps4414-564ml_ 560 10.7 4.0 0.12 0.13 0.14 0.13 0.17 lps4414-684ml_ 680 11.7 3.5 0.10 0.11 0.12 0.13 0.17 lps4414-824ml_ 820 15.1 3.0 0.10 0.105 0.11 0.11 0.14 lps4414-105ml_ 1000 16.3 2.6 0.10 0.102 0.106 0.10 0.13 lps4414-155ml_ 1500 26.4 2.2 0.096 0.099 0.100 0.085 0.11 lps4414-185ml_ 1800 35.0 1.9 0.089 0.094 0.097 0.075 0.10 lps4414-225ml_ 2200 42.5 1.9 0.082 0.089 0.092 0.065 0.080 lps4414-335ml_ 3300 56.0 1.3 0.072 0.078 0.083 0.055 0.070 designer?s kit c340 contains 3 of each values core material ferrite core and winding loss see www.coilcraft.com/coreloss terminations rohs compliant silver-palladium-platinum-glass frit. other terminations available at additional cost. weight 82.3 ? 89.8 mg ambient temperature ?40c to +85c with i rms current, +85c to +125c with derated current storage temperature component: ?40c to +125c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 1000/7 reel; 3500/13 reel plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth recommended pick and place nozzle: od: 4.5 mm; id: 2 mm pcb washing only pure water or alcohol recommended ? very low dcr; excellent current handling ? 4.4 4.4 mm footprint; only 1.4 mm tall 1. please specify termination and packaging codes: lps4414-223m lc termination: l = rohs compliant silver-palladium- platinum-glass frit. special order: t = rohs tin-silver-copper (95.5/4/ 0.5) or s = non-rohs tin-lead (63/37). packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (1000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d =13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (3500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms, 0 adc. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 8753es or equivalent. 5. dc current at which the inductance drops the specified amount from its value without current. 6. current that causes the specified temperature rise from 25c ambient. 7. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering.
? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. shielded smt power inductors C lps4414 series document 548-2 document 548-2 revised 10/01/10 0.169 0.004 4,30 0,10 0.169 0.004 4,30 0,10 0.059 1,50 winding direction dash number 0.0551 1,40 max internal code xxx x 0.185 4,70 0.118 3,00 0.128 3,25 0.059 1,50 0.185 4,70 0.055 1,40 recommended land pattern 0.118 3,00 0.124 3,15 0.030 0,75 typ typ 0.030 0,75 typical l vs current 0.01 0.1 110 current (a) 0.1 1 10 10000 1000 100 inductance (h) 1000 h 3300 h 1 h 10 h 3.3 h 33 h 330 h 100 h typical l vs frequency 0.1 1 10 10000 1000 100 0.01 0.1 110 frequency (mhz) inductance (h) 1 h 10 h 3.3 h 33 h 1000 h 3300 h 330 h 100 h current derating -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) percent of rated current 120 110 100 90 80 70 60 50 40 30 20 10 0 i sat i rms 25c dimensions are in inches mm
|
